If the iron is an indispensable household appliance for you, sooner or later you will be interested in such a question as cleaning the iron, or rather, how to clean the iron from scale and carbon deposits.
Regardless of the brand of the iron, as a result of operation, scale and carbon deposits occur on its surface.
This is not a very pleasant phenomenon, because pollution on the iron can not only be transferred to your blouse or dress, but also ruin the thing forever. Therefore, to be aware of how to clean the iron from scale and carbon deposits is simply necessary for any housewife.
So…
Simple ways to descale and scale your iron at home
We present to your attention several simple ways to clean the iron, proven by many housewives. 
How to clean iron with salt
It would seem how salt can clean the iron. Everything is very simple! Take a sheet of paper, put it on an ironing board.
Pour salt evenly onto the paper. It can be ordinary or sea salt. Turn on the iron and heat it to maximum temperature.
Iron the salt with intense movements until the soot is cleaned. During ironing, you will see how the salt begins to darken, absorbing dirt from the surface of the iron.
Another effective way how to clean iron from salt with salt, also useful to you in everyday life.
To do this, take a gauze and a denser cloth, pour salt in gauze, and wrap it in another piece of cloth.
Wipe the heated iron with salt in gauze until the carbon deposits completely disappear. Salt cannot be used to clean an iron that has a Teflon surface; it can damage it.
How to clean an iron with a paraffin candle
To clean the iron with a paraffin candle, you need a cotton cloth, in which you need to wrap the candle.
Heat the appliance and wipe the surface of the iron with a candle wrapped in cloth to remove any carbon deposits.
Be careful that paraffin does not get into the holes on the iron. After all, if this happens, you risk staining your clothes with paraffin when you iron things.
How to clean an iron with vinegar and ammonia
To clean the surface of the iron from plaque with vinegar and ammonia, take a soft rag, soak it in vinegar, add a few drops of ammonia, and wipe the unheated iron until the dirt disappears.
You can also put the fabric soaked in a solution of vinegar and ammonia on a flat surface and leave a chilled iron on it for several hours.
After that, take a dense, rough cloth and remove plaque from the surface of the iron.
We clean the iron with hydrogen peroxide
Cleaning the iron with hydrogen peroxide is also a good way. To do this, apply liquid to a cotton swab and wipe the iron. Contamination will be removed. 
Special iron cleaners
100% help store special means for cleaning the iron. The chemical components contained in such special products are aimed at quickly and efficiently cleaning the iron of plaque and carbon deposits.
One of the best ways to clean your iron is pencil for cleaning the iron.
To remove carbon deposits from the iron, rub the surface of the heated iron with a pencil and wait a while.
Then remove the product with a cloth. When the iron has completely cooled down, wipe it with a damp cloth for thorough cleaning.
How to clean the iron with a solution of salt and vinegar
An excellent iron cleaner - solution of salt and vinegar. Heat vinegar and add salt (1/1) in a small bowl.
When the salt is completely dissolved in vinegar, and the liquid cools down a bit, take a rag or soft brush, and wipe the sole of the iron with the prepared product.
It is advisable to do this procedure in rubber gloves to protect your handles.
You can finally clean the iron after applying a solution of salt and vinegar by ironing some old cloth. It will remove the last traces of dirt from the surface of the iron.
You can also use this solution. descale the iron. To do this, take a cotton swab, and immersing it in the prepared liquid, wipe the holes from which the steam comes out.
The iron is also cleaned with soda diluted in water to the state of slurry, and even toothpaste.
In order for everything to work out, a tool is applied to the ironing surface, rubbed with a cloth or soft brush, and then wiped with a clean cloth. To fix the result, iron a dense cloth to clean it completely.
